Precision sheet metal fabricator

1，(1)The sheet metal chassis material used for precision sheet metal processing should be in accordance with the technical standard, otherwise it cannot be applied. (2) If cold-rolled sheet is used, then the surface should not have scuffs, scratches, rust stains and debris, etc., which means that there should be no shortcomings. (3) machinery and equipment to be prepared, there is also the need to use special tools, such as micrometers, vernier calipers, tape measures and scribing needles, etc.

2, the process level of preparation and the relevant engineering drawings, as well as process regulations, there is also the specification standards, etc., to understand and master in particular. (2) To check whether the materials are in accordance with the process requirements, and the facilities to do the required lubrication work so that they can work normally. Ningbo precision sheet metal processing for sheet metal chassis follows the principles, which have certain application areas, specifically: the thinness of the material to be cut, its basic size should be 0.5-6mm, and its relatively large total width range should be 2500mm.